Database Merge Guidelines; Displaying Roles When Distribution Is Enabled; User Accounts - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

User Accounts

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Database Merge Guidelines

Fabric merge does not modify the role database on a switch. If two fabrics merge, and the fabrics have
different role databases, the software generates an alert message.
See the
•
•

Displaying Roles When Distribution is Enabled

When you enable distribution for roles, you can view either the pending role database (the database
before it is distributed) or the running database.
To view the roles using Fabric Manager, follow these steps:
Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the
Step 1
Roles CFS tab in the Information pane (see
Figure 39-6
Set the Config View As drop-down value to pending to view the pending database or set the Config View
Step 2
drop-down menu to running to view the running database.
Click Apply Changes to save this change.
Step 3
User Accounts
Every Cisco MDS 9000 Family switch user has the account information stored by the system. Your
authentication information, user name, user password, password expiration date, and role membership
are stored in your user profile.
The tasks explained in this section enable you to create users and modify the profile of an existing user.
These tasks are restricted to privileged users as determined by your administrator.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
39-10
"CFS Merge Support" section on page 13-9
Verify that the role database is identical on all switches in the entire fabric.
Be sure to edit the role database on any switch to the desired database and then commit it. This
synchronizes the role databases on all the switches in the fabric.
Roles CFS Tab
Chapter 39
for detailed concepts.
Figure 39-6).
OL-17256-03, Cisco MDS NX-OS Release 4.x
Configuring Users and Common Roles