Replacing The Server To A Different Port On The Same Switch - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Fabric manager configuration guide, release 4.x
Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:
Table of Contents

Advertisement

Chapter 14
Configuring FlexAttach Virtual pWWN
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 14-20
In the Server WWN window, enter the existing FlexAttach server virtual port WWN to be replaced, and
Step 7
the new server physical port WWN.
Click Finish to complete the FlexAttach configuration for the new server.
Step 8

Replacing the Server to a Different Port on the Same Switch

To replace a server with a spare server on a different port in the same switch, follow these steps:
In the Fabric Manger window, select Tools > FlexAttach > Replace Server.
Step 1
The Replace Failed Server wizard is displayed.
Step 2
In the Replace Failed Server wizard, click the With Spare Server on Same NPV Switch radio button.
Step 3
Click Next.
The Choose Failed Port window is displayed.
In the Choose Failed Port selection window, from the Select a Switch drop-down list, select the switch.
Step 4
From the list of interfaces displayed, select the port from which the server needs to be detached.
Step 5
Click Next.
Step 6
OL-17256-03, Cisco MDS NX-OS Release 4.x
Server WWN Entries
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Using the Server Admin FlexAttach Wizards
(Figure
14-18)
(Figure
14-19)
14-21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents