Adding Communities; Deleting A Community String - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 40 Configuring SNMP
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
(Optional) Provide an expiration date for the user and the file name of an SSH key.
Step 6
Click Create to create the new roles.
Step 7

Adding Communities

You can configure read-only or read-write access for SNMPv1 and SNMPv2 users. Refer to RFC 2576.
To create an SNMPv1 or SNMPv2c community string using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane.
Step 2 Click the Communities tab in the Information pane.
You see the existing communities (see
Figure 40-5
Click Create Row.
Step 3
You see the Create Community String dialog box.
Check the Switch check boxes to specify one or more switches.
Step 4
Enter the community name in the Community field.
Step 5
Select the role from Role drop-down list.
Step 6
Note
Click Create to create the new entry.
Step 7

Deleting a Community String

To delete a community string using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane.
Step 2 Click the Communities tab in the Information pane.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Communities Tab Under Users and Roles
You can enter a new role name in the field if you do not want to select one from the drop-down
list. If you do this, you must go back and configure this role appropriately (see the
Authorization" section on page
Figure 40-5).
39-1).
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Creating and Modifying Users
"Role-Based
40-7