Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 557

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Configuring Domain Parameters
The Fibre Channel domain (fcdomain) feature performs principal switch selection, domain ID
distribution, FC ID allocation, and fabric reconfiguration functions as described in the FC-SW-2
standards. The domains are configured on a per VSAN basis. If you do not configure a domain ID, the
local switch uses a random ID.
Caution Changes to fcdomain parameters should not be performed on a daily basis. These changes should be
made by an administrator or individual who is completely familiar with switch operations.
When you change the configuration, be sure to save the running configuration. The next time you reboot
Tip
the switch, the saved configuration is used. If you do not save the configuration, the previously saved
startup configuration is used.
This chapter includes the following sections:
Fibre Channel Domains, page 25-2
•
Domain IDs, page 25-8
•
FC IDs, page 25-16
•
Displaying fcdomain Statistics, page 25-22
•
Default Settings, page 25-22
•
OL-17256-03, Cisco MDS NX-OS Release 4.x
C H A P T E R
Cisco MDS 9000 Family Fabric Manager Configuration Guide
25
25-1