Port Security Database Cleanup; Default Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 46 Configuring Port Security
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Port Security Database Cleanup

To clear all existing statistics from the port security database for a specified VSAN using Fabric
Manager, follow these steps:
Expand a Fabric, expand a VSAN and then select Port Security in the Logical Domains pane.
Step 1
You see the Port Security information in the Information pane (see
Click the Statistics tab.
Step 2
You see all the configuration databases.
Select the appropriate configuration database and check the Clear option.
Step 3
Click the Apply Changes icon to save your changes.
Step 4
To clear any learned entries in the active database for a specified interface within a VSAN using Fabric
Manager, follow these steps:
Expand a Fabric, expand a VSAN and then select Port Security in the Logical Domains pane.
Step 1
You see the Port Security information in the Information pane.
Select the Actions tab. You see all the configuration databases.
Step 2
Select the appropriate configuration database and check the AutoLearn option.
Step 3
Click the Apply Changes icon to save your changes.
Step 4
You can clear the Statistics and the AutoLearn option only for switches that are local and do not acquire
Note
locks. Also, learned entries are only local to the switch and do not participate in distribution.

Default Settings

Table 46-5
Table 46-5
Parameters
Auto-learn
Port security
Distribution
OL-17256-03, Cisco MDS NX-OS Release 4.x
lists the default settings for all port security features in any switch.
Default Security Settings
Default
Enabled if port security is enabled.
Disabled.
Disabled.
Note
Enabling distribution enables it on all VSANs in the switch.
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Default Settings
Figure 46-8).
46-23