Default Settings - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Default Settings

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
There must be at least one SDV-enabled switch that is not a Cisco MDS 9124 Switch between the server
Caution
and the device that are being virtualized. In other words, SDV does not work when initiators and primary
devices are connected to the same Cisco MDS 9124 Switch.
Default Settings
Table 27-1
Table 27-1
Parameters
enable
Cisco MDS 9000 Family Fabric Manager Configuration Guide
27-10
lists the default settings for SDV parameters.
Default SDV Configuration Parameters
Chapter 27
Default
disabled
OL-17256-03, Cisco MDS NX-OS Release 4.x
SAN Device Virtualization