Replacing A Server With Another Server - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Using the Server Admin FlexAttach Wizards
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 14-17
In the Server WWN window, enter the existing server virtual port WWN to be moved.
Step 10
Click Finish.
Step 11

Replacing a Server with Another Server

You can use the Replace Server wizard to accomplish the following tasks:
•
•
Cisco MDS 9000 Family Fabric Manager Configuration Guide
14-18
Existing Server Virtual Port WWN Entry
Replace a failed server with a new server onto the same port without changing the SAN. The new
server gets the same virtual pWWN as the failed server because the virtual pWWN is assigned to
the port.
Replace a server with a spare server on the same NPV device or a different NPV device, which can
be brought online without changes to the SAN. This is achieved by moving the virtual port WWN
from the current server port to the spare port.
Chapter 14 Configuring FlexAttach Virtual pWWN
OL-17256-03, Cisco MDS NX-OS Release 4.x