Suspending A Ficon Vsan; Configuring The Code-Page Option - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 36 Configuring FICON
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 36-10
Click anywhere in the row of the VSAN that you want to delete.
Step 2
Click Delete Row to delete the VSAN.
Step 3
Note

Suspending a FICON VSAN

To suspend a FICON VSAN using Fabric Manager, follow these steps:
Step 1 Click All VSANs.
You see all the VSANs listed in the Information pane.
Select the VSAN that you want to suspend.
Step 2
Set the Admin drop-down menu for a VSAN to suspended.
Step 3
Click the Apply Changes icon to save these changes.
Step 4
This command can be issued by the host if the host is allowed to do so (see the
Note
Move the Switch Offline" section on page

Configuring the code-page Option

FICON strings are coded in Extended Binary-Coded Decimal Interchange Code (EBCDIC) format.
Refer to your mainframe documentation for details on the code page options.
Cisco MDS switches support international-5, france, brazil, germany, italy, japan,
spain-latinamerica, uk, and us-canada (default) EBCDIC format options.
OL-17256-03, Cisco MDS NX-OS Release 4.x
All VSANs Table
Deleting the VSAN will also delete the associated FICON configuration file, and the file cannot
be recovered.
36-21).
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Configuring FICON
"Allowing the Host to
36-19