Using the FCIP Wizard
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Figure 48-13
Check the Write Acceleration check box to enable FCIP write acceleration on this FCIP link.
Step 9
See the
Check the Enable Optimum Compression check box to enable IP compression on this FCIP link.
Step 10
See the
Click Next.
Step 11
Set the Port VSAN and click the Trunk Mode radio button for this FCIP link, (see
Step 12
Note
Cisco MDS 9000 Family Fabric Manager Configuration Guide
48-12
Specifying Tunnel Properties
"FCIP Write Acceleration" section on page
"FCIP Compression" section on page
If FICON is enabled/FICON VSAN is present on both the switches, the
displayed, otherwise
Figure 48-25
48-29.
48-37.
is displayed.
OL-17256-03, Cisco MDS NX-OS Release 4.x
Chapter 48
Configuring FCIP
Figure
48-14).
Figure 48-26
is
Need help?
Do you have a question about the AP775A - Nexus Converged Network Switch 5010 and is the answer not in the manual?
Questions and answers