Discarding The Changes; Enabling Distribution; Clearing Sessions - Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual

Chapter 39 Configuring Users and Common Roles
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m

Discarding the Changes

If you discard (abort) the changes made to the pending database, the configuration database remains
unaffected and the lock is released.
To discard role-based configuration changes using Fabric Manager, follow these steps:
Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the
Step 1
Roles CFS tab in the Information pane.
Set the Config Action drop-down menu to abort to discard any uncommitted changes.
Step 2
Click Apply Changes to save this change.
Step 3

Enabling Distribution

To enable role-based configuration distribution using Fabric Manager, follow these steps:
Step 1 Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the
Roles CFS tab in the Information pane.
Step 2 Set the Global drop-down menu to enable to enable CFS distribution.
Step 3 Click Apply Changes to save this change.

Clearing Sessions

To forcibly clear the existing role session in the fabric using Fabric Manager, follow these steps:
Expand Switches > Security and then select Users and Roles in the Physical Attributes pane. Click the
Step 1
Roles CFS tab in the Information pane.
Set the Config Action drop-down menu to clear to clear the pending database.
Step 2
Click Apply Changes to save this change.
Step 3
Any changes in the pending database are lost when you clear a session.
Note
OL-17256-03, Cisco MDS NX-OS Release 4.x
Cisco MDS 9000 Family Fabric Manager Configuration Guide
Role Distributions
39-9