Cisco AP775A - Nexus Converged Network Switch 5010 Configuration Manual page 319

Chapter 13 Using the CFS Infrastructure
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
You see the configuration for this feature based on the master switch (see
Modify the feature configuration. For example, right-click the name in the Master column and select
Step 8
Create Row to create a server for NTP.
Set the ID and the Name or IP Address for the NTP server.
a.
Set the Mode radio button and optionally check the Preferred check box.
b.
Click Create to add the server.
c.
Figure 13-16
Click the Delete Row icon to delete a row.
Step 9
If you make any changes, the status automatically changes to Pending (see
Figure 13-17
Click the Commit CFS Pending Changes icon to save the changes (see
Step 10
Figure 13-18
The status changes to Running (see
Step 11
OL-17256-03, Cisco MDS NX-OS Release 4.x
Servers Tab
Status Change to Pending
Commit CFS Pending Changes
Figure
Cisco MDS 9000 Family Fabric Manager Configuration Guide
13-19).
CFS Example Using Fabric Manager
Figure 13-16).
Figure 13-17).
Figure 13-18).
13-21