Port_Security Messages; Pruning Messages - Cisco WS-C2955T-12 Software Manual

Appendix A System Messages

PORT_SECURITY Messages

This section contains the port security error messages.
Error Message PORT_SECURITY-2-SECURITYREJECT
Explanation
Recommended Action
add the MAC address to the secure address table of the secure port.
Error Message PORT_SECURITY-2-SECURITYREJECT: Security violation occurred on module
[dec] port [dec] caused by MAC address [enet]
Explanation
Recommended Action
add the MAC address to the secure address table of the secure port.

PRUNING Messages

This section contains the VLAN Trunking Protocol (VTP) pruning error messages.
Error Message PRUNING-1-INVTLV: rx summary in domain [chars] with invalid TLV value:
[hex]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
Error Message PRUNING-1-JOININVFSTV: Join rx on trunk [chars]-invalid first vlan:
[dec]
Explanation
Recommended Action
Enter the show tech-support command to gather data that might provide information to determine
the nature of the error. If you cannot determine the nature of the error from the error message text or
from the show tech-support output, contact your Cisco technical support representative, and provide
the representative with the gathered information.
78-6511-08
A packet with an unexpected source address is received on a secure port.
Remove the station with the unexpected MAC address from the secure port, or
A packet with unexpected source address is received on a secure port.
Remove the station with the unexpected MAC address from the secure port, or
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
No explanation is available at this time.
Copy the error message exactly as it appears on the console or in the system log.
Catalyst 2900 Series XL and Catalyst 3500 Series XL Software Configuration Guide
Error Message and Recovery Procedures
A-29