Example: Configuring Vsys Resource Limits (Nsm Procedure) - Juniper NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01 Manual
Configuring screenos devices guide
Hide thumbs
Also See for NETWORK AND SECURITY MANAGER 2010.4 - CONFIGURING SCREENOS DEVICES GUIDE REV 01:
- Manual (340 pages) ,
- Administration manual (1026 pages) ,
- Installation manual (244 pages)
Table of Contents
Advertisement
Related
Documentation
Example: Configuring Vsys Resource Limits (NSM Procedure)
Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
You cannot set the reserved value higher than the configured maximum value.
The total allocated usage, which is the sum of reserved values or actual-use values
(whichever is higher) for all virtual systems, cannot exceed the global maximum value.
NOTE: For more information on setting vsys limitations, see the Concepts
& Examples ScreenOS Reference Guide.
Virtual Routers Overview on page 296
Virtual Router General Properties Overview on page 297
Access List Overview on page 298
Policy-Based Routing Overview on page 351
Vsys DHCP Enhancement Overview on page 355
Vsys Session Limit Overview on page 358
To configure vsys resource limits:
In the NSM navigation tree, select Object Manager > VSYS Profile.
1.
Select the Add icon and configure the following options in the New VSYS Profile dialog
2.
box:
In the Name box, enter Gold.
For Scale-Size, Maximum, enter 32.
For DIP enter 25 (Maximum) and 5 (Reserved).
For MIP enter 25 (Maximum).
For Policy enter 50 (Maximum).
For Mpolicy enter 5 (Maximum).
For Session Limitation enter 1200 (Maximum).
For CPU Weight, enter: 30. The default is 50.
Click OK to apply the settings.
3.
Virtual Routers Overview on page 296
Virtual Router General Properties Overview on page 297
Access List Overview on page 298
Policy-Based Routing Overview on page 351
Chapter 11: Virtual Systems
357
Advertisement
Table of Contents
