Configremove - Brocade Communications Systems 8 Command Reference Manual

configRemove

Deletes a saved configuration file.
Synopsis configremove -local|-USB|-U [file]
Description This command deletes a configuration file that was previously saved to the local chassis or to an
attached USB device by using the configUpload command.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
-local
-USB | -U
Examples To remove a configuration file from the local chassis:
switch:admin> configremove -local first_config.txt
To remove a configuration file from an attached USB device without specifying a filename:
switch:admin> configremove -USB
File Name [config.txt]: second_config.txt
See Also configDownload, configUpload, configList, configShow
Fabric OS Command Reference
53-1001764-02
Removes a configuration file that was previously created by configUpload
-local from the local chassis.
Removes a configuration file that was previously created by configUpload
-USB from an attached USB device. The options -USB and -U are equivalent.
file Specifies the configuration file to be removed. If the -file option is omitted, the
command prompts for a file name.
2
configRemove
123