Nszonemember - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

nsZoneMember

nsZoneMember
Displays the information on online devices zoned with a specified device.
SYNOPSIS
nszonemember pid | wwn
nszonemember -a | -u
DESCRIPTION
Use this command to display information on all online devices zoned with the specified device. The
device can be specified by WWN or Port ID (PID). Use this command with the -u option to display all
unzoned devices in the entire fabric. Use the -a option to display online zoned device data for each local
device.
The command output displays the following information:
Type
Pid
COS
PortName
NodeName
Permanent Port Name
DeviceType
Port Index
Shared Area
Device Shared in Other AD
Additional lines may display if the device has registered any of the following information (the switch
automatically registers SCSI inquiry data for FCP target devices):
•
•
•
•
•
•
542
U - known, N - N_Port, NL - NL_Port.
The 24-bit Fibre Channel address.
A list of classes of service supported by the device.
The device's port world wide name (WWN).
The device's node WWN.
The physical N_Port or NL_Port WWN.
The device type.
The index of the port to which the device is attached.
Whether or not the device shares an area with other devices.
Whether or not the device is shared in other Admin Domains.
FC4 supported
IP address (node)
IPA
port and node symbolic name (local device only)
fabric port name
hard address or port IP address
Fabric OS Command Reference
53-1001764-01