Displaying And Maintaining Ipv6 Mbgp; Displaying Ipv6 Mbgp - 3Com S7906E Configuration Manual

To do...
Configure the cluster ID of the
route reflector
The clients of a route reflector should not be fully meshed, and the route reflector reflects the routes
of a client to the other clients. If the clients are fully meshed, you need to disable route reflection
between clients to reduce routing costs.
If a cluster has multiple route reflectors, you need to specify the same cluster ID for these route
reflectors to avoid routing loops.

Displaying and Maintaining IPv6 MBGP

Displaying IPv6 MBGP

To do...
Display the IPv6 MBGP peer
group information
Display IPv6 MBGP routing
information injected with the
network command
Display the IPv6 MBGP AS
path information of routes
Display IPv6 MBGP peer/peer
group information
Display the prefix entries in the
ORF information of the
specified BGP peer
Display IPv6 MBGP routing
table information
Display IPv6 MBGP routing
information matching a AS path
ACL
Display IPv6 MBGP routing
information with the specified
community attribute
Display routing information
matching an IPv6 MBGP
community list
Display IPv6 MBGP dampened
routing information
Use the command...
reflector cluster-id cluster-id
Use the command...
display bgp ipv6 multicast group
[ ipv6-group-name ]
display bgp ipv6 multicast network
display bgp ipv6 multicast paths
[ as-regular-expression ]
display bgp ipv6 multicast peer [ [ ipv6-address ]
verbose ]
display bgp ipv6 multicast peer ipv6-address
received ipv6-prefix
display bgp ipv6 multicast routing-table
[ ipv6-address prefix-length ]
display bgp ipv6 multicast routing-table
as-path-acl as-path-acl-number
display bgp ipv6 multicast routing-table
community [ aa:nn<1-13> ] [ no-advertise |
no-export | no-export-subconfed ]*
[ whole-match ]
display bgp ipv6 multicast routing-table
community-list { basic-community-list-number
[ whole-match ] |
adv-community-list-number }&<1-16>
display bgp ipv6 multicast routing-table
dampened
1-15
Remarks
Optional
By default, a route reflector
uses its router ID as the cluster
ID.
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view