Setting The Attributes Of A Local User - 3Com 8800 Configuration Manual

3Com Switch 8800 Configuration Guide

40.2.5 Setting the Attributes of a Local User

The attributes of a local user include its password display mode, state, service type and
some other settings.
I. Setting the password display mode
Perform the following configuration in system view.
Table 40-6 Set the method that a local user uses to display password
Set the mode that a local user uses to
display password
Cancel the mode that the local user
uses to display password
Where, auto means that the password display mode will be the one specified by the
user at the time of configuring password (see the password command in the following
table for reference), and cipher-force means that the password display mode of all the
accessing users must be in cipher text.
II. Setting/Removing the attributes of a local user
Perform the following configuration in local user view.
Table 40-7 Set/Remove the attributes concerned with a specified user
Set a
specified user
Remove the password set for
the specified user
Set the state of the specified
user
Set a service type for the
specified user
Cancel the service type of the
specified user
Operation
Operation
password for a
Chapter 40 AAA and RADIUS/TACACS+ Protocol Con
local-user
{ cipher-force | auto }
undo
password-display-mode
Command
password { simple | cipher } password
undo password
state { active | block }
service-type { ftp [ ftp-directory directory ] |
lan-access | ppp [call-number call-number |
callback-nocheck
callback-number ] | ssh [ level level | telnet |
terminal ] | telnet [ level level | ssh | temninal ] |
terminal [ level level | ssh | telnet ] }
undo service-type { ftp [ ftp-directory directory ] |
lan-access | ppp [call-number call-number |
callback-nocheck
callback-number ] | ssh [ level level | telnet |
terminal ] | telnet [ level level | ssh | terminal ] |
terminal [ level level | ssh | telnet ] }
40-10
figuration
Command
password-display-mode
local-user
|
callback-number
|
callback-number