Basic Settings; Security Settings - Siemens SINAMICS S200 Operating Instructions Manual

Commissioning (web server)
7.3 Getting started
7.3.3

Basic settings

Overview
Initial basic settings are defined in the function view.
Requirement
The web server is being called for the first time.
Description of function
The basic settings are as follows:
• Preferred language of the user interface
• Converter date and time
After these entries have been made, using the "Next" button, you can continue to the
Security Wizard.
7.3.4

Security settings

Overview
The Security Wizard offers the following settings:
• User Management & Access Control (UMAC)
• Access to the integrated web server via the service interface with HTTP or HTTPS protocol
• Drive data encryption
Requirement
NOTICE
Data manipulation due to low protection
An inadequately protected converter makes it easier for potential attackers to access the drive
data. Data manipulation can cause the drive to malfunction or damage it.
You can find information about the following actions on the Internet:Industrial Cybersecurity
Configuration Manual (https://support.industry.siemens.com/cs/ww/en/view/109810578).
• Only use the low security settings in exceptional cases and only if an information security
• Configure the settings for full protection immediately after adding a drive or several drives
174
risk analysis finds that it is reasonable to do so.
to the project.
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA