Table of Contents
Advertisement
Dependency:
The setpoint for the input signals is specified using p0796.
See also: p0796
Note
This parameter is not saved when backing up data (p0977).
DI: Digital Input
p0795.0...9
Digital inputs simulation mode
S200 PTI
Data type: Unsigned32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: -
Min:
-
Description:
Sets the simulation mode for digital inputs.
Bit array:
Bit
00
01
02
03
04
05
06
07
08
09
Dependency:
The setpoint for the input signals is specified using p0796.
See also: p0796
Note
This parameter is not saved when backing up data (p0977).
DI: Digital Input
p0796.2...7
Digital inputs simulation mode setpoint
S200 Basic PTI
Data type: Unsigned32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: -
Min:
-
Description:
Sets the setpoint for the input signals in the digital input simulation mode.
Bit array:
Bit
02
03
04
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
Signal name
DI 0 (X132.5)
DI 1 (X132.6)
DI 2 (X132.7)
DI 3 (X132.8)
DI 4 (X132.9)
DI 5 (X132.10)
DI 6 (X132.11)
DI 7 (X132.12)
DI 8 (X132.13)
DI 9 (X132.14)
Signal name
DI 2 (X132.7)
DI 3 (X132.8)
DI 4 (X132.9)
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Digital inputs
Max:
-
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Digital inputs
Max:
-
A.3 Parameters
Factory setting:
0000 0000 0000 0000 bin
1 signal
0 signal
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Simulation
Terminal eval
Factory setting:
0000 0000 bin
1 signal
0 signal
High
Low
High
Low
High
Low
Appendix
631
Advertisement
Table of Contents
