Table of Contents
Advertisement
System messages
11.3 Faults and alarms
Message value:
%1
Component:
None
Response:
NONE
Acknowledgment: NONE
Cause:
Error when reading the read-write data of the EEPROM in the Option Board.
Alarm value (r2124, interpret decimal):
Only for internal Siemens troubleshooting.
Remedy:
- Carry out a POWER ON (switch-off/switch-on).
- Replace the Control Unit.
A01314
Topology: Component must not be present
Message class:
Error in the parameterization / configuration / commissioning procedure (18)
Message value:
%1, to %2, %3, connection: %4
Component:
None
Response:
NONE
348
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
Advertisement
Table of Contents
