Table of Contents
Advertisement
Appendix
A.3 Parameters
c0769[0...1]
Analog inputs enable
S200 PTI
Data type: Unsigned8
Read permission:
Write permission:
Parameter group:
Unit: -
Description:
Signal to enable the analog inputs.
Index:
[0] = AI0 (X132.19/20)
[1] = AI1 (X132.21/22)
Note
AI: Analog Input
c0771[0...1]
CU analog outputs signal
S200 PTI
Data type: FloatingPoint32
Read permission:
Write permission:
Parameter group:
Unit: %
Description:
Signal for the analog outputs.
Index:
[0] = AO0 (X132.45/46)
[1] = AO1 (X132.47/48)
Note
AO: Analog Output
r0772[0...1]
CU analog outputs output value currently referred
S200 PTI
Data type: FloatingPoint32
Read permission:
Write permission:
Parameter group:
Unit: %
Description:
Displays the actual referred output value of the analog outputs.
Index:
[0] = AO0 (X132.45/46)
[1] = AO1 (X132.47/48)
Note
AO: Analog Output
p0773[0...1]
CU analog outputs smoothing time constant
S200 PTI
Data type: FloatingPoint32
Read permission:
Write permission:
Can be changed in the operating
state:
Parameter group:
Unit: ms
Min:
0.0 [ms]
Description:
Sets the smoothing time constant of the 1st order lowpass filter for the analog outputs.
626
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Analog outputs
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Analog outputs
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Analog outputs
Visible in: Standard display
Read drive data or acknowledge messages
Edit device configuration or drive applications
Operation
Analog outputs
Max:
1000.0 [ms]
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
Factory setting:
0.0 [ms]
Advertisement
Table of Contents
