Siemens SINAMICS S200 Operating Instructions Manual page 103

Pulse train servo drive system

Hide thumbs Also See for SINAMICS S200:

Table of Contents

1. Screw in the eyebolts.

2. Hook the crossbar into the eyebolts.

3. Set the motor down on a hard, level surface.

4. Secure the motor against unintentional movements.

SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2

Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA

Position of the eyebolts

Lifting and transporting with a crossbar (example diagram)

Danger of severe injury due to unintentional movements of the motor

If the motor is not secured after being set down, unintentional movements of the motor can

cause serious injury.

• After the motor has been set down, secure it in position.

• Do not release the lifting devices until the motor has been secured in position.