Standard Scope; Use Of Third-Party Products In This Documentation; Websites Of Third-Party Companies - Siemens SINAMICS S200 Operating Instructions Manual

Pulse train servo drive system

Hide thumbs Also See for SINAMICS S200:

Table of Contents

Standard scope

This documentation describes the functionality of the standard scope. This scope may differ

from the scope of the functionality of the system that is actually supplied. Please refer to the

ordering documentation only for the functionality of the supplied drive system.

Further functions may be executable in the system, which are not explained in this

documentation. However, there is no entitlement to these functions in the case of a new

delivery or service.

This documentation does not contain all detailed information on all types of the product.

Furthermore, this documentation cannot take into consideration every conceivable type of

installation, operation and service/maintenance.

The machine manufacturer must document any additions or modifications they make to the

product themselves.

This documentation contains recommendations relating to third-party products. Siemens

accepts the fundamental suitability of these third-party products. You can use equivalent

products from other manufacturers.

Siemens does not accept any warranty for the use of third-party products.

This document may contain hyperlinks to third-party websites. Siemens is not responsible for

and shall not be liable for these websites and their content. Siemens has no control over the

information which appears on these websites and is not responsible for the content and

information provided there. The user bears the risk for their use.

SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2

Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA

Introduction

1.2 About this manual