Siemens SINAMICS S200 Operating Instructions Manual page 584

Appendix
A.1 UL Markings
• The device provides overtemperature and overload protection.
• Use copper wires with a permissible temperature of 75 °C for all power cables. You can also
use cables with a higher rated temperature value. It is not permissible to reduce the
conductor cross-section.
Additional requirements relating to CSA compliance:
Maximum height for CSA: 2000 m.
Motor overload protection according to UL 61800‑5‑1 Ed.2
For the settings required to activate the motor overload protection according to UL 61800‑5‑1
Ed.2, see Section "Cooling (Page 520)".
MOTION-CONNECT connection system
The recommended assignment of motors and cables can be found in Section "Device
combinations (Page 52)".
Other assignments are not possible.
The technical parameters of the cables are tailored to the requirements of the motors and
verified by system tests. For detailed information, see Section "Technical data of MOTION-
CONNECT cables (Page 573)".
582
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA