Siemens SINAMICS S200 Operating Instructions Manual page 319

Display Example
Axxxxx
A.xxxxx.
Axxxxx.
Cxxxxx
C.xxxxx.
Cxxxxx.
S Off
r xxx
r -xxx
T x.x
T -x.x
P.xxxxx
Px.xxxx
P.-xxxx
Px.xxxx
DCxxx.x
E.xxxxx
Ex.xxxx
E.-xxxx
Ex.xxxx
Restart
P-----
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
Description
Alarm code
Alarm code of the first alarm
Alarm code
Safety message code
Safety message code of the first safe‐
ty message
Safety message code
Operating display: servo-off
Actual speed (positive direction)
Actual speed (negative direction)
Actual torque (positive direction)
Actual torque (negative direction)
Actual position (positive direction)
Actual position (positive direction)
Actual position (negative direction)
Actual position (negative direction)
Actual DC link voltage
Position following error (positive di‐
rection)
Position following error (positive di‐
rection)
Position following error (negative di‐
rection)
Position following error (negative di‐
rection)
Restart the converter
The parameter does not exist.
Remarks
In the case of a single alarm
In the case of multiple alarms
In the case of multiple alarms
In the case of a single safety message
In the case of multiple safety messages
In the case of multiple safety messages
-
-
-
-
-
The digits are not fully displayed. Press the
DOWN button to scroll to the next page.
The remaining digits have been fully displayed.
The digits are not fully displayed. Press the
DOWN button to scroll to the next page.
The remaining digits have been fully displayed.
-
The digits are not fully displayed. Press the
DOWN button to scroll to the next page.
The remaining digits have been fully displayed.
The digits are not fully displayed. Press the
DOWN button to scroll to the next page.
The remaining digits have been fully displayed.
-
The symbol "P" could be other parameter sym‐
bols, like "T", "E", etc.
System messages
11.1 SDI Status
317