Save Drive Data To Backup File; Scope Of The Backup - Siemens SINAMICS S200 Operating Instructions Manual

Pulse train servo drive system

Hide thumbs Also See for SINAMICS S200:

Table of Contents

Save drive data to backup file

Run the "Save drive data to backup file" function in the following situations:

• After commissioning

• Before drive data is reset using function "Restore factory settings" in the web server

You can find more information in Chapter "Restore factory settings (Page 209)".

• Before drive data is completely reset

You can find more information in Chapter "Reset of all user-defined settings to the factory

setting via an SD card (Page 481)".

• Before a firmware upgrade/downgrade

1. Call the "Backup and restore" menu.

2. Click on the "Save drive data to backup file" button.

Optional: Assign a name for the backup file.

The drive data is backed up. The backup file is saved in the download folder of your operating

• The drive data are not encrypted in the backup file if you deactivated function "Drive data

encryption" in the Security Wizard.

• The drive data are encrypted in the backup file if function "Drive data encryption" is activated

in the Security Wizard and you have configured a drive password.

Recommendation:

– Store the password in a secure location, for example, in a password manager. Ensure that

The "Back up parameters" function backs up all converter settings to one file.

SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2

Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA

you can access the password if needed.

Commissioning (web server)

7.4 Functions and menus