Table of Contents
Advertisement
Procedure
The fan unit is installed at the top of the converter.
1. Switch off the converter power supply.
2. Press the release clips to remove the fan unit from the converter as shown below. Use a
screwdriver if necessary.
3. Install the new fan unit in the inverse sequence as shown below.
Result
You have now replaced the fan unit.
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
Corrective maintenance
12.3 Service and maintenance for spare parts
501
Advertisement
Table of Contents
