Attaching Output Elements - Siemens SINAMICS S200 Operating Instructions Manual

Pulse train servo drive system

Hide thumbs Also See for SINAMICS S200:

Table of Contents

Proceed as follows to mount the feather key into the key slot:

1. Install the feature key ("

key slot are fitted closely. Siemens recommends that you place the V-type block ("

the shaft extension for supporting.

2. Knock the feather key into the key slot by using a copper bar.

Attaching output elements

Appropriate arrangement of the output elements reduces the bending torque load applied to

the shaft and the bearing.

Well‑lubricated feather key

V-type block

Mounting the feather key

") to the key slot ("

") and make sure that the feather key and the

SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2

Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA