Standard Application Wirings (Factory Setting); Pulse Train Input Position Control (Pti) - Siemens SINAMICS V90 Operating Instructions Manual

4.3.4

Standard application wirings (factory setting)

4.3.4.1

Pulse train input position control (PTI)

Standard wiring for pulse train input position control mode:
*
The 24 V power supplies in the connection diagram are as follows:
1)
2)
3)
Note
Only one of the pulse train input channels can be used.
SINAMICS V90, SIMOTICS S-1FL6
Operating Instructions, 09/2016, A5E36037884-002
Digital inputs, supporting both PNP and NPN types.
24 V power supply for SINAMICS V90. All the PTO signals must be connected to the
controller with the same 24 V power supply as SINAMICS V90.
Isolated digital input power supply. It can be the controller power supply.
Isolated digital output power supply. It can be the controller power supply.
Connecting
4.3 Control/status interface - X8
101