Remote Access Control - Kenwood NXR-1700 Function Reference

11 CONTROLLING THE REPEATER BY REMOTE CONTROL (REMOTE CONTROL) / 11.2 Remote Access
Control

11.2 Remote Access Control

Remote Access Control is the function which permits or prohibits the connection to the repeater via a network.
A users can prohibit the connection when a network connection is not needed. This allows the repeater to reduce the
risk of unauthorized access by malicious users.
Configuration Item
Enable
Remote Access
Control
Disable
Enabling the configuration allows the access to the repeater via a network. Disabling the configuration disables the
access to the repeater via a network. The repeater with Remote Access Control disabled cannot be configured by
using the FPU via a network. To perform the FPU configuration via a network, the FPU configuration is available by
allowing the access from the OLED display menu (Remote Access).
Item
Control
In addition, permitting or prohibiting the network connection by Remote Access Control does not affect the
communication service between repeaters by Conventional IP Network.
Configuration using KPG-D7
Configuring Remote Access Control ( Edit > Optional Features > Common Page 1 > Mode )
・
Configuration using Web Tool
None
・
FUNC (E)/ Ver 2.00
Table 11-2 Configuration Items of Remote Access Control
Description
Allows the access to the repeater via a network.
The FPU, Web Tool, and Multi Loader can be used.
Prohibits the access to the repeater via a network.
The access to the repeater by using the FPU, Web Tool, and Multi Loader is
prohibited.
Table 11-3 OLED display Control Menu
Menu Item
Remote Access
Description
Permitting/Prohibiting the network connection
146