Kenwood NXR-1700 Function Reference page 230

20 MULTI LOADER / 20.4 Operation (from Startup to Firmware Conversion, Transfer, and Transfer Completion)
Status Request
Description
Repeater Status
Status00 Transferring: Transferring the firmware
Status01 Updating: Overwrite script is being executed (firmware is written to the Standby area).
Status02 Standby (Wait Reboot): Overwrite script is complete (wait for rebooting).
Status03 Rebooting: Rebooting
Status04 Activated: Startup is complete with the new firmware that has been transferred.
Error01 When access to the repeater fails
Error02 When the firmware is written a repeater other than the corresponding repeater
Error03 When a Port Open error occurs
Error04 When the writing of an unsupported firmware to the repeater is performed
Error05 When an SFTP sequence authentication error occurs
Error06 When in Force Firmware Programming Mode
Version Information
Operation_Firm_Ver
Stored_Firm_Ver
Reactivation Method
Hot Standby
FUNC (E)/ Ver 2.00
Table 20-10 Status Request Status
Table 20-11 Version Information
Description
The firmware version in operation is displayed.
The firmware version on standby is displayed.
The type of Reactivation selected when Transfer is executed is displayed.
Usage: If the firmware switch trigger is lost, Reactivation can be actively executed
from the Multi Loader by referring to the type of Reactivation. For Specified Time, the
configured startup time is written at the same time.
Active, Standby, or Failsoft is displayed.
229