Kenwood NXR-1700 Function Reference page 83

4 TRANSMISSION/ RECEPTION/ REPEAT / 4.6 Configuring the Duration of Transmission in the Received Mode
(Signaling Reset Timer)
Signaling Reset Timer starts counting down after reception has completed.
This function can be used only if the repeater transmits by using the PTT (Test PTT and External PTT) control.
The following are the communication methods on a mixed channel depending on the receiving conditions and the
configuration in Transmit Mode:
Receiving Conditions
If conditions 1) and 2) below are both satisfied:
1) The repeater has never received an analog signal or a digital signal
for which the signaling received by the repeater and the signaling
configured for the repeater match.
2) Currently, no signal is being received on the mixed channel used by
the repeater for transmission. Or, the repeater is receiving an analog
signal or a DMR digital signal or an NXDN digital signal for which the
signaling received by the repeater and the signaling configured for
the repeater do not match.
The repeater is receiving a DMR digital signal or an NXDN digital signal
for which the signaling received by the repeater and the signaling
configured for the repeater match.
If conditions 1) to 3) below are all satisfied:
1) The repeater has received a DMR digital signal or an NXDN digital
signal for which the signaling received by the repeater and the
signaling configured for the repeater match.
2) The reception of the DMR digital signal or the NXDN digital signal in
1) has been completed, and the length of time configured in
Signaling Reset Timer is counting down.
3) Currently, no signal is being received on the mixed channel used by
the repeater for transmission. Or, the repeater is receiving an analog
signal or a DMR digital signal or an NXDN digital signal for which the
signaling received by the repeater and the signaling configured for the
repeater do not match.
FUNC (E)/ Ver 2.00
Table 4-7 Signaling Reset Timer (1 sec to 300 sec)
82
Transmit Mode Communication Method
for Transmission Using the
PTT (Test PTT and External
PTT) control
Analog Analog
DMR/ NXDN DMR/ NXDN
Analog DMR/ NXDN
DMR/ NXDN DMR/ NXDN
Analog DMR/ NXDN
DMR/ NXDN DMR/ NXDN
〇
△
△