Kenwood NXR-1700 Function Reference page 181
Hide thumbs
Also See for NXR-1700:
- Service manual (124 pages) ,
- Instruction manual (25 pages) ,
- Instruction manual (25 pages)
Table of Contents
Advertisement
12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Configuration
Configuration using KPG-D7
Configuring Default Voice Logger ID ( Edit > Voice Logger > Target SIP Phone ID > Default Voice Logger ID)
・
・
Configuring SIP Phone ID Range (Min) ( Edit > Voice Logger > Target SIP Phone ID > SIP Phone ID Range (Min))
Configuring SIP Phone ID Range (Max) ( Edit > Voice Logger > Target SIP Phone ID > SIP Phone ID Range (Max))
・
Configuring Voice Logger ID ( Edit > Voice Logger > Target SIP Phone ID > Voice Logger ID)
・
FUNC (E)/ Ver 2.00
Description
Voice Logger ID can be used only in DMR Mode.
The Voice Logger to record an Individual Call addressed to a SIP Phone is selected
from Voice Logger List. The configuration is done by specifying the Voice Logger ID.
If Voice Logger ID is not configured, recording is not executed.
180
Advertisement
Table of Contents
