Kenwood NXR-1700 Function Reference page 47

1 FUNCTIONS AND PANEL LAYOUT / 1.3 OLED display
Startup Status
The startup status is displayed on the OLED display. (Refer to Display on the OLED Display.)
List of Status Migration by
Each Operation
Opera Power Off by Power
tion Control
Power On by Power
Control
Service Stop by the
Web Tool
Service Start by the
Web Tool
Service Restart by
the Web Tool
Service Reboot by
the Web Tool
DC On
Conditions Description
Standby RF function, Knob function
disabled
Level3 NXR-1700 is activated.
Level2 End of Feature Error
confirmation
NXR-1700 is activated.
Level1.5 (↑↓) Kernel is activated.
Level1 FPGA is activated.
After migrating to Level 3, the indication blinks for 2 seconds for PLL Lock. The service can forcibly be started by pressing
the Knob; however, if the service is started while PLL is not locked, a PLL Unlock error is displayed.
FUNC (E)/ Ver 2.00
Table 1-24 Startup Status-1
Status Before Operation
DC Off DC On
Power Off by Power
Control
Disabled Disabled
Disabled →
Disabled Disabled
Disabled Disabled
Disabled Disabled
Disabled Disabled
→ Level1
Table 1-25 Startup Status-2
Display
OLED Display
Standby display
Normal display, etc.
■■■■
■■■
■■
■
46
Power On by Power Control
Service Stop
Level1
Standby
Disabled
Level3
Level3
Level1
->
Level3
Standby
on the Screen Off Timer
Enabled
Enabled
N/A
N/A
N/A
N/A
Service Start
Level1
Level3
Standby
Disabled
Standby
->
Level3
Level1
->
Level3
Level3