Kenwood NXR-1700 Function Reference page 176

12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Item Description
Busy Tone Selectable
Receive Operation The receive operation is performed by using a SIP Phone.
Remarks The relationship of a SIP Phone ID and extension number is one-to-one.
For DMR Mode (Paging Call)


For DMR Mode (Autodial)

For NXDN Mode

Item Description
Transmit Operation DMR Mode: Paging Call
DMR Mode: Autodial
NXDN Mode: Autodial
Prefix 1 to 9999 (DMR Mode Only)
Destination External number that corresponds to a SIP Phone ID
For DMR Mode (Paging Call)



For DMR Mode (Autodial)

FUNC (E)/ Ver 2.00
If the beginning of a destination ID of a Paging Call and PABX Prefix match, the
repeater notifies the transceiver of the caller ID of an audio signal from a telephone as
FFFEE1.
Regardless of whether or not sip.conf of Asterisk is configured, the repeater returns a
Paging Call response.
The repeater notifies the transceiver of the caller ID of an audio signal from a telephone
as FFFEE1.
The repeater notifies the transceiver of the caller ID of an audio signal from a telephone
as FFF5.
Table 12-13 In the Case of a Transceiver Call to PSTN
The repeater notifies Asterisk of a call request with the SIP Phone ID notified from the
transceiver.
Asterisk calls the external number that corresponds to the notified SIP Phone ID.
A SIP Phone ID and external number are linked in the Asterisk configuration.
An external number needs to be prefixed with "01". In addition, Asterisk needs to be
configured to use Asterisk to determine the destination and, if the destination is PSTN,
to dial the specified external number.
Selectable whether to sound according to the Asterisk
"Busy" configuration
Entry: Prefix + SIP Phone ID
Entry: Autodial
Entry: Autodial
PSTN Prefix
175