12 CONVENTIONAL IP NETWORK / 12.1 Communicating with a Repeater Connected by Using an IP Network
(Intersite Call)
Also, the following configurations need to be done using KPG-D7.
Configuring Site Group in Network Setting (configuration of Intersite Call destination)
• Configuring the following configurations for each channel
• Configuring "DMR", "NXDN" or "Mixed" in Channel Type
(Refer to
Configuring the Reception Method of a Channel (Channel
• Configuring Conventional IP Network to be enabled or disabled for each channel
• Configuring a target site for each channel
• Configuring the configurations related to an IP network, such as an IP address
Note
By configuring the target site of an Intersite Call in Site Group Table, the target of the Intersite Call can be changed for each
・
GID or UID by using User List.
Configuration using KPG-D7
Configuring Site Group in Network Setting (Edit > Channel Information > Channel Edit > Network Setting > Site
・
Group)
・
Configuring Conventional IP Network to be enabled or disabled (Model > Product Information > Enhanced
Features > Conventional IP Network)
Configuring Unicast Site List ( Edit > Site Group Table > Unicast Site List)
・
Configuring the configurations related to an IP network (Edit > Conventional IP Network > Network > Unicast IP
・
Address List)
FUNC (E)/ Ver 2.00
Type).)
148