Kenwood NXR-1700 Function Reference page 227

20 MULTI LOADER / 20.4 Operation (from Startup to Firmware Conversion, Transfer, and Transfer Completion)
Also, when Transfer or Reactivation is executed, the result of the execution of Transfer or Reactivation can be
displayed by Status Request.
If the target repeater is waiting for Reactivation, updating and overwriting can be performed for the items of
Reactivation Method. Refer to the Table of
Figure 20-6 Relationship of Enabling or Disabling the Rewriting of Reactivation Method
Auto Restart is available while waiting for Reactivation of Specified Time.
After the firmware transfer is complete, the repeater firmware is automatically switched.
Auto Restart is available while waiting for Reactivation of Remote Reactivation.
After the firmware transfer is complete, the repeater firmware is automatically switched.
Change to Remote Reactivation is available while waiting for Reactivation of Specified Time.
The time specification is disabled and Remote Reactivation is in standby state.
Change to Specified Time is available while waiting for Reactivation of Remote Reactivation.
The Reactivation standby state is disabled and the time specification by Specified Time is in standby state.
Reactivation is valid for the repeaters waiting for Reactivation by Remote Reactivation and Specified Time.
After Reactivation is received, the repeater firmware is switched.
FUNC (E)/ Ver 2.00
the link about the items of Reactivation Method.
226