Kenwood NXR-1700 Function Reference page 55

2 GETTING STARTED / 2.2 Writing the Configuration Data to the Repeater
The following IP addresses are preset at the time of shipment from the factory:
 IP Address: 192.168.0.1
 Subnet Mask: 255.255.255.0
 Default Gateway: 192.168.0.254
The default configuration of the user name and password of the Web Tool is as follows. Because the password is not
configured under the default configuration, change the password after logging in to the Web Tool as required.
 User Name: admin
 Password: (described separately)
About the Password When Logging in to the Web Tool
When the admin password is not configured such as during access for the first time, the screen prompting for the
configuration of the password is displayed by entering only User Name as admin and clicking the "Login" button. Refer
to User Password about the screen prompting for the configuration of a password. When the password is configured in
User Password, the state where the Web Tool is logged in occurs. From next time onwards, logging in is done by
entering the configured password in the login screen (Figure 2-2). Refer to the User Password section of Basic
Configuration for the details of the Password configuration.
FUNC (E)/ Ver 2.00
Figure 2-1 User Password (Web Tool)
Figure 2-2 Login (Web Tool)
54