Kenwood NXR-1700 Function Reference page 200

14 IP INTERFACE FUNCTION / 14.2 Voice Logging
Configuration Description
GID Range (Min- The minimum value and maximum value of the GID range targeted for recording are
Max) configured.
A GID in the range from GID Range (Min) to GID Range (Max) is a target for recording.
GID Range (Min)
This is the minimum value of GID targeted for recording.
GID Range (Max)
This is the maximum value of GID targeted for recording.
The same GID can be entered in GID Range (Min) and GID Range (Max). In this case, the GID
is handled as a single GID. For example, if the configurations are GID Range (Min) = 10 and
GID Range (Max) = 10, only voice calls of the destination GID = 10 are recorded in the Voice
Logger configured for the specified Voice Logger ID.
If operated in DMR, the configuration range of ID shows as integers from 1 to 16776415.
Voice Logger ID The Voice Logger to record a Group Call with a GID specified in GID Range as the destination
is configured. It is selected from Voice Logger List.
・
・
・
Configuration using KPG-D7
Configuring Default Voice Logger ID ( Edit > Voice Logger > Target GID > Default Voice Logger ID)
・
Configuring All Group Call Voice Logger ID ( Edit > Voice Logger > Target GID > All Group Call Voice Logger ID)
・
Configuring Unaddress Call Voice Logger ID ( Edit > Voice Logger > Target GID > Unaddress Call Voice Logger
・
ID)
Configuring GID Range (Min) ( Edit > Voice Logger > Target GID > GID Range (Min))
・
Configuring GID Range (Max) ( Edit > Voice Logger > Target GID > GID Range (Max))
・
・ Configuring Voice Logger ID ( Edit > Voice Logger > Target GID > Voice Logger ID)
Target SIP Phone ID
Refer to the link about Target SIP Phone ID.
FUNC (E)/ Ver 2.00
The Voice Logger to record a Group Call is selected from Voice Logger List. The
configuration is done by specifying the Voice Logger ID.
If Voice Logger ID is not configured, a Group Call is not recorded to the Voice Logger.
A Group Call sent from a SIP Phone is also recorded in the same way.
199