Kenwood NXR-1700 Function Reference page 191

13 MANAGING DEVICES ON AN IP NETWORK (SNMP) / 13.2 SNMP Troubleshooting
OID (Object Identifier)
1.3.6.1.4.1.46861.1.1.2.1.8.2
1.3.6.1.4.1.46861.1.1.2.2.7.2
1.3.6.1.4.1.46861.1.1.2.3.1.2
1.3.6.1.4.1.46861.1.1.2.3.2.2
1.3.6.1.4.1.46861.1.1.2.4.3.2
1.3.6.1.4.1.46861.1.1.2.5.5.2
FUNC (E)/ Ver 2.00
Name Description
Fan Error Detection Is output when the fan can
no longer spin.
Power Supply Voltage Is output when the power
Status supply voltage goes below
the lower limit of the
threshold.
PLL Unlock Detection Is output when the RX PLL
(RX) unlocks.
PLL Unlock Detection Is output when the TX PLL
(TX) unlocks.
Current Consumption Is output when an error in
(HPA) Error the HPA current
consumption is detected.
Temperature (Drive Is output when an error in
Amp) Error the Drive Amp temperature
is detected.
190
Trouble Shooting
Confirm the fan status. If a
fan error cannot be
confirmed, contact
JVCKENWOOD sales
company technical staff.
Confirm if the power cord,
etc. is connected to the
repeater and if the value of
the power supply voltage is
within the specification
range.
Restart the repeater
because the PLL IC may
not have the correct data
configuration.
Or, execute Tuning Data >
Restore of the FPU.
Restart the repeater
because the PLL IC may
not have the correct data
configuration.
Or, execute Tuning Data >
Restore of the FPU.
If this problem occurs,
contact JVCKENWOOD
sales company technical
staff.
Stop the repeater
transmission and confirm if
the symptom improves.
If the symptom does not
improve, contact
JVCKENWOOD sales
company technical staff.