Kenwood NXR-1700 Function Reference page 192

13 MANAGING DEVICES ON AN IP NETWORK (SNMP) / 13.2 SNMP Troubleshooting
OID (Object Identifier)
1.3.6.1.4.1.46861.1.1.2.5.6.2
1.3.6.1.4.1.46861.1.1.2.5.7.2
1.3.6.1.4.1.46861.1.1.2.5.8.2
1.3.6.1.4.1.46861.1.1.2.1.17.2
1.3.6.1.4.1.46861.1.1.2.1.16.2
Note
 For proper operation of the repeater, the power cable and transmitting antenna (50 Ω) need to be connected to
the repeater.
FUNC (E)/ Ver 2.00
Name Description
Temperature (TX Is output when an error in
Block) Error the TX Block temperature is
detected.
Temperature (TCXO) Is output when an error in
Error the TCXO temperature is
detected.
Temperature (HPA) Is output when an error in
Error the HPA temperature is
detected.
VSWR Error Detect Is output when the strength
level of the reflected wave
goes higher than the
threshold value during
transmission.
RF Power Down Is output when the transmit
Detect power output decreases.
191
Trouble Shooting
Stop the repeater
transmission and confirm if
the symptom improves. If
the symptom does not
improve, contact
JVCKENWOOD sales
company technical staff.
Stop the repeater
transmission and confirm if
the symptom improves. If
the symptom does not
improve, contact
JVCKENWOOD sales
company technical staff.
Stop the repeater
transmission and confirm if
the symptom improves. If
the symptom does not
improve, contact
JVCKENWOOD sales
company technical staff.
Confirm that a transmitting
antenna (50 Ω) is
connected. If it is
connected, contact
JVCKENWOOD sales
company technical staff.
Stop the repeater
transmission and confirm if
the symptom improves. If
the symptom does not
improve, contact
JVCKENWOOD sales
company technical staff.