Configuring The Target Of An Intersite Call (Site Group Table); About The Network Configuration - Kenwood NXR-1700 Function Reference

12 CONVENTIONAL IP NETWORK / 12.4 Configuring the Target of an Intersite Call (Site Group Table)

12.4 Configuring the Target of an Intersite Call (Site Group Table)

Site Group Table is the table for which Multicast IP Address or Unicast Site List which are used as the target to
make an Intersite Call is configured in addition to Multicast IP Address or Unicast Site List configured for each
channel.
By using KPG-D7, Multicast IP Address or Unicast Site List can be configured for each table of the maximum 64
tables to be used as the target of an Intersite Call.
Also, whether or not to use Site Group Table can be configured for each GID or UID registered in User List. By using
Site Group Table, the target of an Intersite Call can be changed by each GID or UID.
Note
 A maximum of 16 repeaters can be interconnected if Unicast communications are used. If Multicast communications are used,
the number of repeaters that can be interconnected varies depending on the type of network devices, such as a router.

A network device which supports Multicast needs to be used in order to use Multicast communications.
Configuration using KPG-D7
 Configuring Site Group Table ( Edit > Site Group Table)

12.5 About the Network Configuration

In order to use Conventional IP Network, the following functions associated with an IP network need to be configured
for the repeater by using KPG-D7 or Web Tool:
• IP Address
• Subnet Mask
• Default Gateway
• Unicast IP Address List
IP Address
IP Address is the IP address of the repeater at own station. If the repeater makes Unicast communications, the IP
address of the site configured in Site Number is automatically configured. If the repeater makes Multicast
communications, the IP address can be configured by being directly entered.
The IP address provided by the network administrator must be configured in IP Address.
Configuration using Web Tool
 Configuring IP Address ( System > IP Configuration > New Configuration > IP Address)
FUNC (E)/ Ver 2.00
163