Kenwood NXR-1700 Function Reference page 143

10 FUNCTION PORTS / 10.3 Available Functions for AUX Output Ports
Function Name
Receive Unlock
Transmit Unlock
Fan Status
Receive Signal
(Threshold)
FUNC (E)/ Ver 2.00
Description
NXDN
If the repeater receives an NXDN digital signal and the
received RAN code matches the RAN code
preconfigured for the repeater, the output port becomes
active.
If the received RAN code does not match the RAN code
preconfigured for the repeater, the output port becomes
inactive.
If no RAN code is preconfigured, the output port
becomes active even if any RAN code is received. The
output port becomes inactive if the reception ends.
Mixed
If the repeater receives an analog signal, the repeater
behaves in the same manner as when the repeater
receives a signal on an analog channel.
If the repeater receives a DMR digital signal, the
repeater behaves in the same manner as when the
repeater receives a signal on a digital channel.
If the repeater receives an NXDN digital signal, the
repeater behaves in the same manner as when the
repeater receives a signal on an NXDN digital channel.
The output port becomes active if RX PLL is unlocked.
The output port becomes inactive if RX PLL is locked.
The output port becomes active if TX PLL is unlocked.
The output port becomes inactive if TX PLL is locked.
The output port becomes active if the fan stops.
The output port becomes inactive if the fan starts
running.
The output port becomes active if the RSSI voltage is
reduced.
The output port becomes inactive if the RSSI voltage is
increased.
142
Remarks
The reference RSSI level can
be configured in Lowest
Receive Level Threshold.
(Refer to Configuring the
Threshold to Activate or
Deactivate the RSSI Voltage
Detection Function (Lowest
Receive Level Threshold).)