Power Supply Monitor - Kenwood NXR-1700 Function Reference

15 POWER SUPPLY MONITOR / 14.2 Voice Logging

15 POWER SUPPLY MONITOR

Power Supply Monitor is the function to monitor the power supply of the repeater and warn a user according to the
voltage level that the voltage of the repeater is reduced.
Using the AUX Output port or transmitting a tone warns a user that the voltage of the repeater is reduced.
The warning voltage (Power Supply Lower Level) at each warning level can be configured using KPG-D7.
In addition, at each of the warning levels, a warning tone and an operation tone can be configured. According to
emergency levels, such as a caution or a warning, these tones can be used.
Item
Warning Tone
Frequency (Warning Tone)
Operation Tone
Frequency (Operation Tone)
Interval (Operation Tone)
Power Supply Lower Level
Function (AUX Output)
Configuration using KPG-D7
Configuring Warning Tone to be enabled or disabled ( Edit > Optional Features > Common Page 2 > Power
・
Supply Monitor > Warning Tone > Warning Tone)
Configuring Frequency ( Edit > Optional Features > Common Page 2 > Power Supply Monitor > Warning Tone >
・
Frequency)
・ Configuring Operation Tone to be enabled or disabled ( Edit > Optional Features > Common Page 2 > Power
Supply Monitor > Operation Tone > Operation Tone)
Configuring Frequency ( Edit > Optional Features > Common Page 2 > Power Supply Monitor > Operation Tone
・
> Frequency)
・ Configuring Interval ( Edit > Optional Features > Common Page 2 > Power Supply Monitor > Operation Tone >
Interval)
Configuring Power Supply Lower Level ( Edit > Optional Features > Common Page 2 > Power Supply Monitor >
・
Power Supply Lower Level)
・ Configuring Function of AUX Output (Edit > Function Port > AUX > AUX Output > Function)
FUNC (E)/ Ver 2.00
Table 15-1 Power Supply Monitor
Description
Configures Warning Tone to be enabled or disabled.
Configures the frequency of Warning Tone.
Configures Operation Tone to be enabled or disabled.
Configures the frequency of Operation Tone.
Configures the interval at which Operation Tone is transmitted.
Configures the power supply voltage threshold at which Power Supply Monitor goes
Active.
Configures Power Supply Lower Limit for any AUX Output if the Power Supply
Monitor status is notified by AUX Port.
200