Kenwood NXR-1700 Function Reference page 61

2 GETTING STARTED / 2.4 System Structure
DMR Mode
To make the repeater behave as a DMR Conventional repeater, select DMR Mode.
In DMR Mode, a DMR Conventional system using multiple repeaters can be structured.
Repeaters configured for DMR Mode are available on a DMR Conventional system structured with TKR-Dx10 series. If
DMR Conventional (KWD-NX10DC) is selected in Product Information of KPG-D7, the repeater behaves as a DMR
Conventional repeater.
In Product Information, the repeater functions are enabled by selecting the license assigned to the repeater.
Conventional IP Network of DMR Mode can be used in combination with TKR-Dx10 series.
The following tables show the types of repeaters and the communication status for each Ch Type:
Table 2-7 Supported Transmission of Conventional IP Network (Receiver NXR-1700/ NXR-1800)
Sender
TKR-Dx10
NXR-1700/ NXR-
1800
FUNC (E)/ Ver 2.00
Figure 2-3 Product Information (DMR Conventional)
Receiver
Ch Type DMR
DMR Frame
Analog Frame
DMR Frame
Analog Frame
NXR-1700
Ch Type Mixed
✔ ✔
✔ ✔
－
✔
60
Ch Type Analog
－
－
✔