Available Functions For Aux Output Ports - Kenwood NXR-1700 Function Reference

10 FUNCTION PORTS / 10.3 Available Functions for AUX Output Ports

10.3 Available Functions for AUX Output Ports

The following functions can be assigned to the AUX Output port.
If the function assigned to the AUX Output port is enabled, the output port becomes active.
Function Name
COR
TOR
FUNC (E)/ Ver 2.00
Table 10-3 Available Functions for AUX Output Ports
Description
The output port becomes active if the repeater receives
a signal.
The output port becomes inactive if the repeater
receives no signal.
The following are the repeater behaviors that may vary
depending on the configuration in Channel Type:
Analog
If the repeater receives an analog signal and the
received QT tone or DQT code matches the QT tone or
DQT code preconfigured for the repeater, the output port
becomes active.
If the received QT tone or DQT code does not match the
QT tone or DQT code preconfigured for the repeater, the
output port becomes inactive.
If no QT tone or DQT code is preconfigured, the output
port becomes active when the repeater receives an
analog signal. The output port becomes inactive if the
transmission ends.
DMR
If the repeater receives a DMR digital signal and the
received Color Code matches the Color Code
preconfigured for the repeater, the output port becomes
active.
If the received Color Code does not match the Color
Code preconfigured for the repeater, the output port
becomes inactive.
141
Remarks
Refer to Configuring the
Reception Method of a
Channel (Channel Type).