Kenwood NXR-1700 Function Reference page 198

Hide thumbs Also See for NXR-1700:
Table of Contents

Advertisement

14 IP INTERFACE FUNCTION / 14.2 Voice Logging
Target UID
In Target UID, a UID targeted for recording and the list of Voice Logger to be the destination of a recording can be
confirmed, and a UID targeted for recording to each Voice Logger can be edited.
Configuration
Description
Default Voice
The Voice Logger to be the destination of a recording of an Individual Call using anything other
Logger ID
a UID configured in Target UID is configured.
If no configuration of Target UID exists, all Individual Calls are recorded to the Voice Logger of
Default Voice Logger ID.
UID Range (Min-
The minimum value and maximum value of the UID range targeted for recording are
Max)
configured.
This is the function to specify the range of UID for recording. A UID in the range from UID
Range (Min) to UID Range (Max) is a target for recording.
UID Range (Min)
This is the minimum value of UID targeted for recording.
UID Range (Max)
This is the maximum value of UID targeted for recording.
The same UID can be entered in UID Range (Min) and UID Range (Max). In this case, the UID
is handled as a single UID. For example, if the configurations are UID Range (Min) = 10 and
UID Range (Max) = 10, only voice calls of the destination UID = 10 are recorded in the Voice
Logger configured for the specified Voice Logger ID.
If operated in DMR, the configuration range of ID shows as integers from 1 to 16776415.
Voice Logger ID
The Voice Logger to record an Individual Call with a UID specified in UID Range as the
destination is configured.
It is selected from Voice Logger List.
FUNC (E)/ Ver 2.00
Table 14-4 Target UID
The Voice Logger to record an Individual Call is selected from Voice Logger List. The
configuration is done after specifying the Voice Logger ID.
This is the destination of a recording of an Individual Call of anything other than a UID
configured in Target UID.
If Default Voice Logger ID is not configured, an Individual Call is not recorded to the Voice
Logger.
An Individual Call sent from the transceiver to a SIP Phone by using a Paging Call is
recorded to the Voice Logger for the corresponding SIP Phone ID by determining Prefix.
197

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nxr-1800Nxr-1700eNxr-1800eNxr-1800e2

Table of Contents