4 TRANSMISSION/ RECEPTION/ REPEAT / 4.14 Take Over
4.14 Take Over
Take Over is the function to disable control from an external device.
If this function is enabled, control by the various functions for External Monitor, External PTT, AUX Input, and AUX
Input/Output (Input only) is prohibited.
If Take Over is enabled during transmission by External PTT, the repeater stops transmission. If External PTT is active
when Take Over is disabled, the repeater starts transmission.
Take Over can be toggled between enabled and disabled by using the Remote Control function of the Web Tool and by
the Knob operation.
Note
The AUX Input Monitor function is not affected even if Take Over is enabled.
・
94
FUNC (E)/ Ver 2.00