8 NXDN DIGITAL COMMUNICATIONS / 8.5 Radio Access Control
Note
・
Radio Access Control can be used along with Encryption.
From the point of view of security, the Radio Access Control Key cannot be read by the FPU.
・
The repeater for which Radio Access Control is configured and the existing NXDN Conventional repeater can be connected by
・
using a Conventional IP Network. However, access control by Radio Access Control is available for use by the NXR-1700/ NXR-
1800 repeater only.
To use Radio Access Control, anything other than "Simplex" needs to be configured in Operation Mode for the channel, or the
・
receive frequency and transmit frequency need to be different for the channel.
Configuration using KPG-D7
Configuring Radio Access Control Key ( Edit > Optional Features > Common Page 1 > Radio Access Control >
・
Radio Access Control Key)
Configuring Accept Type ( Edit > Channel Information > Channel Edit > Radio Access Control > Accept Type)
・
FUNC (E)/ Ver 2.00
132