Kenwood NXR-1700 Function Reference page 177

12 CONVENTIONAL IP NETWORK / 12.7 SIP Phone
Item Description
For NXDN Mode

Ring Back Tone Sounds
Ring Tone Sounds
Busy Tone Selectable
Receive Operation The receive operation is performed by using a SIP Phone.
Remarks The relationship of a SIP Phone ID and external number is one-to-one.
For DMR Mode (Paging Call)



For DMR Mode (Autodial)

For NXDN Mode

FUNC (E)/ Ver 2.00
If both PSTN and PABX are used, allow whether the destination is PSTN or PABX to
be distinguished, for example, by prefixing an external number with a certain code. In
addition, Asterisk needs to be configured to use Asterisk to determine the destination
and, if the destination is PSTN, to dial the specified external number.
If the beginning of a destination ID of a Paging Call and PSTN Prefix match, the
repeater notifies the transceiver of the caller ID of an audio signal from a telephone as
FFFEE0.
The destination external number cannot be entered directly due to the entry digit limit of
a Paging Call.
Regardless of whether or not sip.conf of Asterisk is configured, the repeater returns a
Paging Call response.
The repeater notifies the transceiver of the caller ID of an audio signal from a telephone
as FFFEE0.
The repeater notifies the transceiver of the caller ID of an audio signal from a telephone
as FFF5.
Sounds according to the Asterisk "Answer" configuration
Depends on the SIP Phone specifications (The repeater
notifies Asterisk of INVITE.)
Selectable whether to sound according to the Asterisk
"Busy" configuration
176